Features: STAT FAX 2100 MICROPLATE READER
- Fully automatic.
- Bichromatic optics
- On board data reduction calculations include regressions, curve fitting, and cutoff absorbance calculations with step-by-step user prompting.
- Includes parallel and serial outputs.
- Large, non-volatile memory stores at least 50 user entered tests.
Photometric Linear Measurement Range: - 0.20 to 3.0 Absorbance Units (A) Photometric Accuracy: 1% or better Stability: Drift of no more than 0.005A in 8 hours Light Source: Tungsten lamp, with lamp saver feature Wavelengths: Standard - 405, 450, 492, and 630nm 6-VIS - 405, 450, 492, 545, 600, and 630nm 6-UV - 340, 405, 450, 492, 545, and 630nm Type of Filter: Multiple-cavity hard coat interference, 10nm half bandpass Vessel: Standard 96-well microtiter plates or strip trays Electronics Display: Two-line LCD, alphanumeric, 24 characters per line Printer Requirements: Parallel or serial, 80 column, 2K byte minimum buffer capacity, EPSON compatible Keyboard: 29-key, domed membrane switch, enunciating Power Requirements: 115V/230V, 50/60Hz (switch selectable) Serial Port: 2400 baud, 1 start bit, 8 data, 1 stop, no parity Microprocessor: Z80A or Z180 Non-Volatile Memory: Battery supported RAM, holds approx. 50 tests and curves Software Speed: Reads and prints absorbances of 96 wells in about 2 minutes Calculation Modes: Single-point calibration, uptake mode, point to point curve fit, polynomial regression, linear regression (log & linear), cutoff absorbance, multipoint % absorbance Additional Features: Complete user prompting, flags and error messages, partial plate reading, alphanumeric test naming, auto- matic interpretation options, duplicate options, clock and calendar, controls locator, self-check system, curve plotting and editing Other Mixer: Variable time, fixed speed Enclosure: Fire-retardant ABS plastic cover with metal base Dimensions: 17 x 14.5 x 7 Weight: 30lbs. Certifications: UL Listed, CE Mark available
Stat Fax®2600
| |
Residual Volume | <3ul |
Processing Time (Full Plate) | 55 seconds aspirate/dispense (8 Probe Wash Head Standard (12 or 16 Probe Wash Heads Available) |
Dispense Accuracy | < 3% CV at 300 ul |
Liquid Contact Materials | Stainless steel, Delrin, silicone, nylon, PVC, polypropylene |
Display | Two-line LCD, alphanumeric, 24 characters per line |
Washing Programs | Aspirate, dispense, soak - up to 99 minutes 99 seconds |
Non-Volatile Memory | Battery supported RAM, holds approx. 50 wash protocols |
Keyboard | 16-key, domed membrane switch, 4 x 4, enunciating |
Microproccssor | Z80A or Z180 |
Power Requirements | 115V, 50-60Hz (switch selectable) |
Bottles | Plastic, Wash and Waste (2L), Rinse (1L) |
Enclosure | Fire-retardant ABS plastic cover with metal base |
Dimensions | 39 x 34 x 19 cm, 8.6 kg |
Certifications | NRTL Listed、CE Mark |
Special Menu Options | Auto Alignment - senses physical geometry of the head, plate, and carrier mechanism Standby-disables pumps and releases vacuum and pressure Self-Check-performs internal performance tests alignment Auxiliary-allows selection of pre-programmed tests, mechanism and volume calibration, and alphanumeric test naming Constant Plate Cycle Time Optional Manual Plate Depth Selection |
Certifications | NRTL Listed, CE Mark |
harga 1set lengkap.Reader& WASHER
Garansi 1 tahun buatan America
PT.CAHAYA RESTU PRATAMA
cibitung Bekasi
Hp : 081380398896
Tidak ada komentar:
Posting Komentar